±20% Tolerance – Most pots will fall within a value close to 500k. Make sure your guitar has compatible mounting holes – If you are using import guitar, you will need to drill or ream mounting holes wider to fit these pots.
12X (Set of 12) CTS 450G 500K SHORT/split, knurled shaft, audio taper potentiometers. These 10% audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are:500K Ohms/20% Tolerance10% Audio TaperBakelite base plateSolid brass c-clip reinforced shaftSolid brass bushing3/8-32 US thread3/8″ (short shaft) bushing heightSplit, fine 24-tooth, knurled, 1/4″ diameter shaftChamfered shaft for easier knob installation and removalEach pot comes with hardware – 2 nuts, dress washer and lock washerRequires 3/8″ diameter mounting hole Pot is manufactured and branded by CTS , Part # 450GT36K504B2S. Note:If you are uncertain whether your guitar uses short (3/8″) or long (3/4″) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul’s manufactured before 1977 and historic reissues, but please double check before you order.Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot.. If you have questions, please feel free to ask.
The CTS 500K Pot 3/8″ Short Split Shaft Audio Taper Brass 4X is a high-quality knob designed for electric and bass guitars. The 3/8″ split shaft design allows for easy installation and the brass material ensures durability and longevity.
Potentiometer, CTS, Quarter Size, Audio Log6mm Split ShaftSplit Shaft500K ResistanceA tapered logarithmic Audio Pot450T SeriesFor use in guitar audio circuits Specifications:CTS 450T Series500K Split ShaftAudio Style Potentiometer for applying resistance to audio circuitA tapered logarithmic Audio PotQuarter Size .934″ (approximately 15/16″ diameter 23.5mm)Overall height 1.197″ (1 13/64″ 30.3mm)6mm Split shaftShaft is 24 spline shaftOverall shaft thread length is 11/64″Includes one nut and washer per potBody Depth .39″ (25/64″ or 10mm)Shaft Rotation 300 degreeTolerance: 750 VDCPower Rating: 1/4 watts @ 55°C (Resistance above 100K ohms)Operating Temperature: -10C to +80CSolder Heat Resistance: 260 degree for 5 secondsManufacture: CTS”A” Potentiometer is a tapered audio pot, used mainly in volume or tone control.Sold in each, also available in other combinations, please email us for assistance.Please note: These do NOT fit our 6mm push on 18 spline knobs that are 6mmShaft Details6mm split shaft (24 spline) x 0.375 high (3/8″)Thread3/8-32 NefThread Height1/4″Mounting hole required3/8″NOTE: You will need to solder this in to your circuit, knowledge of solder and tools will be needed to use this item.This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov
1X (Single) CTS 450G 500K SHORT/split, knurled shaft, audio taper potentiometer. This 10% audio taper pot is suitable for both tone and volume controls. Some of the features of this pot are:500K Ohms/20% Tolerance10% Audio TaperBakelite base plateSolid brass c-clip reinforced shaftSolid brass bushing3/8-32 US thread3/8″ (short shaft) bushing heightSplit, fine 24-tooth, knurled, 1/4″ diameter shaftChamfered shaft for easier knob installation and removalEach pot comes with hardware – 2 nuts, dress washer and lock washerRequires 3/8″ diameter mounting hole Pot is manufactured and branded by CTS , Part # 450GT36K504B2S. Note:If you are uncertain whether your guitar uses short (3/8″) or long (3/4″) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul’s manufactured before 1977 and historic reissues, but please double check before you order.Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot.. If you have questions, please feel free to ask.
