Musiclily Pro HD A500K Full Brass Metric Split Long Shaft Audio Taper Guitar Pot

Feature Fits some imported or Asia made electric guitars and basses, long thread for guitars with thick tops. Coarse 18-spline split shaft diameter: 6mm (15/64 inch), threaded bushing diameter and height: M9 and 20mm (25/32 inch), requires 9.5mm (3/8 inch) or larger hole in the pickguard to install the pot. Full brass made shaft and thread, better conductivity. Audio taper, resistance: 500K, tolerance: 20%, usually used for humbuckers, remains more high-end frequencies, gives brighter tone than 250K. Package Included 1 piece pot with mounting accesssoriesPaymentDelivery detailsTerms of salesBuyer supportContact usPaymentOrder Total DOES NOT INCLUDE DUTIES, LOCAL TAXES OR ANY OTHER IMPORTATION FEES. Delivery details1. Item will be shipped out in 24 – 48 hours after full payment is clear. A tracking number will be given later.2. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.Terms of salesIf buyer have any return/refund request or issue, please do contact us firstly, we will help you to sort it out.Buyer support Positive feedback and Excellent DSR will be much appreciated! If you have any problem or issue, please feel free to contact us, we are here to help you, most email will be replied in 1-2 days.Contact usMusiclily is a young brand, we supply guitar/bass parts, Musiclily is not affiliated with Fender (FMIC) or Gibson and its sub-brand, all brand belong to their respective owners.On May 23, 2023 at 01:37:48 PDT, seller added the following information:

CTS 500K Balance-Blend w/ Center Detent Linear Split Shaft Pot Fine Spline Pot

Genuine CTS “Balance-Blend” with center detent control pot 500K ohm Linear Taper 3/8″ diameter mounting shaft Fine spline split shaft (approx. 20 splines) Includes nut and washerA balance blend pot is used to blend two pickups on a bass guitar and some electric guitars. See images for detailed pot measurements. Genuine CTS “Balance-Blend” with center detent control pot 500K ohm Linear Taper 3/8″ diameter mounting shaft Fine spline split shaft (approx. 20 splines) Includes nut and washer A balance blend pot is used to blend two pickups on a bass guitar and some electric guitars. See images for detailed pot measurements. Combined Shipping We do combine orders to lower shipping costs for our customers. To receive a combined shipping quote, please use eBay’s “Add to Cart” button for each item. This will provide an estimated shipping cost based on your order’s total weight. In most cases, eBay’s shipping charges will be accurate. International Customers: If you don’t see the “Add to Cart” or “Add to Basket” button you will need to use the US site “www.ebay.com” instead of your country’s eBay site(ex. – www.ebay.au, www.ebay.ca, www.eBay.it, etc.) Shipping Orders placed before 2 pm Monday-Friday(US EST). No shipping on weekends and holidays. Custom products can take up to 2 days to ship. International Shipping Our economy international service or USPS First Class Service is provided by APC Postal Logistics and includes full tracking. The economy international shipping service(APC Postal Logistics) usually arrives within 2-4 weeks with most being delivered by your local post office. Every now and then an order can take a little longer to arrive. Most shipping delays are related to the receiving country’s customs processing or problems with shipping addresses. Please make sure to include a valid phone number with your order in case they need to contact you. All international shipments include carrier insurance with a minimum of $100 of insurance. A claim for a lost package cannot be opened until at least 6 weeks have passed. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost unless specified on your order that is collected by eBay (ie, VAT). If not paid by eBay, the additional charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to your purchase. Terms If you wish to cancel the transaction please contact us immediately to cancel your order. Orders cannot be canceled after they have been shipped. Returns Returns are accepted as long as the item is returned in brand new condition and in its original(undamaged) package. Please take care of the item if there is any possibility of a return. Refunds will not be issued for items that show any signs of damage uncluding to the original packaging, ie. scratches, tool marks, attempted modification, etc. Use eBay’s return system to initiate a return. Buyers are responsible for return shipping unless it is our error. If you believe an error was made by us, please contact us prior to opening a return request. This will allow us to provide you with the best possible customer service. About Us We provide our customers with the best shopping experience. Philadelphia Luthier Tools & Supplies has been selling successfully on eBay since 2009. Our customers have come to expect: Detailed descriptions High quality images Quick dispatching of orders Very fast response to product questions and inquires sent through eBay’s messaging system.

CTS 500k Audio/Log Pot, Split Shaft, Top-Routed Guitars

CTS 500k Audio/Log Pot, Split Shaft, Top-Routed Guitars 500k Audio Taper (Logarithmic) Split-Shaft (Push-On Knobs) Knurled Shaft – 24 Teeth 3/8-32 UTS Bushing Thread .250″ Bushing Length (Mount to Pickguard or Control Plate) Low Torque (Dimpled Back – Turns Easily) We sell these pots individually, the image shows two so that you can see more detail. These pots are perfect for Stratocasters, if 500k pots are desired. The best guitar pots we’re aware of are made by CTS – this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs. CTS 500k Audio/Log Pot, Split Shaft, Top-Routed Guitars 500k Audio Taper (Logarithmic) Split-Shaft (Push-On Knobs) Knurled Shaft – 24 Teeth 3/8-32 UTS Bushing Thread .250″ Bushing Length (Mount to Pickguard or Control Plate) Low Torque (Dimpled Back – Turns Easily) We sell these pots individually, the image shows two so that you can see more detail. These pots are perfect for Stratocasters, if 500k pots are desired. The best guitar pots we’re aware of are made by CTS – this is the brand that pretty much every American guitar company has uséd since the 1940s. We order most of our pots directly from CTS and have them made to our specs. &times &times &times Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Callaham Height-Adjustable Locking Steel Tailpiece Studs Callaham Telecaster Bridge, Vintage, Slant Compensated Brass Saddles Callaham Telecaster Bridge, Vintage, Enhanced Vintage Compensated Stainless Sadd Fender Bridge, Stratocaster Tremolo, American Vintage Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © ToneShapers Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

DiMarzio 500K Short Split Shaft Volume Pot W/High Pass Filter EP1201HP

Please note, This pot will be shipped in box to protect it from any shipping damage DiMarzio Short Shaft Custom Taper 500K Guitar Potentiometer W/High Pass Filter Includes hardware and is intended to be used a Volume Pot. PLEASE NOTE, THESE POTS ARE TOO SHORT TO BE USED IN ARCHED TOP LES PAULS AND THICKER LIKE GUITARS. 500K CUSTOM TAPER VOLUME POT W/HIGH PASS FILTER Standard guitar pots limit your musical expression, only starting to deliver sound at about “3” on the dial and then never getting much louder above “7”. DiMarzio’s custom taper pot is made to solve that problem by precisely delivering the same ratio of signal-to-turn as an actual 10-position actuator. This provides players with audiophile-like control over dramatic volume swells and signal gain, so you can truly use the guitar’s total range. And don’t worry about wearing these out — each pot is rated to 10,000 cycles at 2,000 cycles per hour and is individually tested by DiMarzio to meet our rigid standards. DiMarzio also understands that a pot has to feel as good as it sounds. The tech talk is that we engineered them with a low friction wiper pass and proprietary balance-damping lubricant. In plain terms, that means slick pinky flips and a pot that will still hold at any sweet spot on the dial. So, whether you just crank the guitar to 10, dizzy your audience with violin-esque swells, or prefer to control your gain through the guitar’s volume knob, DiMarzio’s pots put the control back in your hands. For the player who wants to turn down the volume without the typical loss of high end and presence, DiMarzio Custom Taper pots come pre-wired with a “high-pass” filter (also known as a “treble bleed” circuit). Our parallel-wired combination of a 560 pF capacitor and 300 kOhm resistor allow the pot to essentially maintain all of its articulation, attack, and highs, even at whisper levels. Ideal for humbuckers or single-coils, the DiMarzio Custom Taper pot gives players total access to their instrument’s lower ranges of gain and intensity without compromising nuance or tone. The split shaft and bushings are made from machined brass, just like the vintage originals, with 24 teeth and a 32-thread turn, a perfect fit for USA knobs, including DiMarzio, Fender®, and Gibson®. We also include two nuts, one dress washer, and a lock washer for easy installation. All of our pot casings are custom-plated for easy soldering. *Please note, these are direct replacements for the standard 3/8-inch (9.525mm) holes found on most Fenders and Gibsons. Some enlargement may be required for non-standard or import-specific hole diameters. Wiring diagrams for this pot can be found on the DiMarzio web site. FREE EXTRAS WITH EVERY PURCHASE!!! PLEASE NOTE: WE ARE HAVE BEEN AN AUTHORIZED DIMARZIO PICK-UP DEALER FOR OVER 25 YEARS!!! We are a full service guitar shop in operation for over 30 years. We stock over 2000 + Humbucking Pick-ups. IF YOU WOULD LIKE TO LEARN MORE ABOUT THIS POT, OR HAVE ANY OTHER QUESTIONS ABOUT THIS AUCTION, PLEASE, BEFORE YOU PURCHASE, contact me I take ALL parcels to the Post Office personally. PA residents must pay 6% sales tax. See my other auctions, good luck and thank you. PLEASE NOTE: The pots shown ( displayed ) in the pictures are the actual products that are up for auction. U.S.A., U.S. COMMONWEALTH, CANADIAN, AND APO SALES ONLY!!! ALL SALES ARE FINAL.

CTS 500K PUSH/PULL LONG (3/4″) SPLIT SHAFT AUDIO TAPER POT / POTENTIOMETER 1X

One (1X) CTS 500K LONG SPLIT knurled shaft audio taper push/pull potentiometer dpdt (double pole/double throw). This pot allows you to do wiring modifications to your guitar without having to modify the body. Used for coil splitting, coil tapping and phase shifting. This a long shaft pot (threaded bushing is 3/4″ tall & 3/8″ diameter, shaft is .236″diameter). Pot is manufactured by CTS.  Note: 1.  If you are uncertain whether your guitar uses short (3/8″) or long (3/4″) shaft  pots, as a general rule this pot will fit most production Gibson Les Paul’s manufactured after 1977, excluding historic reissues, but  please double check before you order. 2. Not sized for guitars using metric components, requires 3/8″ mounting hole If you have questions, please feel free to ask before you bid. Offer only available to lower 48 states, Alaska & Hawaii. NO INTERNATIONAL BIDDERS PLEASE. Payment is required within 2 days of purchase Use the shopping cart to purchase multiple items, shipping totals are calculated by combined weight. I usually ship within 24 hours of receipt of confirmed payment.  Same day shipping when order is placed before noon Pacific Time M-F. California residents please add 7.75% for sales taxFroo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application RETURNS: If you are dissatisfied with your purchase, you are welcome to return your item.  In order to return your item, you must notify us within 14 days of receipt of the item, and provide the Ebay item #, and date of purchase.  The item must be received back within 30 days of the date of purchase.   In order for us to accept returned item, it MUST be unused and in the same condition it was shipped (this means you have not soldered on lugs, clipped leads, tried to fit a square peg in a round hole, etc.).  For returns over $25.00, a 10% restocking fee will apply.