Alpha 250k Audio Taper Push/Pull Pot for Guitar/Bass

Free eBay listing template designed by dewiso.com Alpha 250k Audio Taper Push/Pull Pot for Guitar/Bass 1 Alpha 250k Audio Taper Push/Pull Pot for Guitar/Bass Genuine Alpha Push/Pull Potentiometer DPDT – (Double-Pole / Double-Throw) Details Value: 250K ohm Shaft Diameter: 6mm Split Shaft Course Knurling Thread: M7 x 0.75 Thread Height: 9.52mm Potentiometer Base Diameter 18mm Potentiometer Total Depth: 24mm Requires A Mounting Hole Diameter of 9.40mm Washer and Nut: Nut and Washer Included Part Number: 250K-PP Contact us We can be contacted Monday to Friday 7:30 am to 3:00 pm through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours. For Friday late questions, we may respond during the weekend but most likely it will be on Monday and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We’d like to be sure you are completely satisfied with your purchase. Payment We only accept Paypal Shipping We only ship to Paypal Verified addresses Disclaimer We try our best to describe in details all of our products. Please read in detail the item description before bidding. Free eBay listing template designed by © dewiso.com.

Alpha DPDT 3/8” Short Shaft Push-Pull 250K Potentiometer. Set of Two

Set of 2 Alpha full-size potentiometers for USA instruments with push-pull actuator switch used for coil tapping, splitting, phasing, or similar applications. Available in 250 kohm or 500 kohm. Because these are imported pots, they normally come with metric specs, but these are the harder to come by USA spec version, so they have the same bushing diameter and thread as CTS pots and more importantly they will fit the holes in your USA guitar body with no modifications. They also have a 24-spline shaft instead of the 18-spline shaft found on metric pots, which means all your knobs will fit. Metric knobs are not interchangeable with USA spec knobs. Check the last image for all the specs.

Alpha 500K Reverse Audio Taper Pot, Left Handed, Split-Shaft

Alpha 500k reverse audio taper pot with hardware. Often used for controls on left-handed instruments Stamped “WD500R” on the back of the housing. Specifications Bushing Threads: 3/8-32 Bushing Length: 3/8″ Bushing Material: Brass Shaft Style: Split-Shaft (Fine Spline 24 Tooth) Shaft Material: Aluminum Professional installation is strongly recommended. Improper installation may result in damage to the product and/or instrument.

Rhythm Roller Knobs Solid Shaft Mini Pots Kit w/ Bracket For Fender Jazzmaster

Made in Japan Jazzmaster Roller Knobs/Bracket Assembly. Pots are Made in Korea The set includes 2 x Jazzmaster Black Roller Knobs , set screw adjustment type 1 x Linear 50K Alpha Solid Shaft Pot 1 x Linear 1 MEG Alpha Solid Shaft Pot 1 x Jazzmaster Pot/Knob bracket Fits Fender Japan or USA We will send out within 1 business days Shipping / Others We will ship this item out via Singapore Post airmail service with a tracking number for confirmation We ship daily so no delays at our end.Different countries will take different amount of time Please feel free to ask any questions you may have to achieve a trouble free transaction! Adding items to watch list enables you to receive our generous offers!

ALPHA 25K ohm mini pots for use with EMG active pickups SET of 2 NEW!

SET OF 2: ALPHA 25K ohm mini pots, audio taper, split, knurled shaft, with nut and washer. FOR EMG or other active pickups. NEW! SET of 2 Note: these are available in LONG shaft or SHORT shaft. Send me a message and let me know the size that you need!! SHORT: 3/8” x 3/8” threaded bushing, perfect for Strat, Tele, P-Bass, J-Bass, SG, 335, Flying V, Explorer, etc. (wood tops can be no thicker then 1/4 inch) LONG: 3/8” x 3/4” threaded bushing. Perfect for Les Paul’s and other thick top guitars. Also available for EMG/25K: CTS 25K Long Shaft pots available here: https://www.ebay.com/itm/4-CTS-25K-Audio-Taper-Pots-EMG-3-4-Long-Shaft-Split-Shaft-with-hardware/282475325070

Alpha Potentiometer A25K Concentric Stacked Dime Size Pot

Alpha A25K Concentric Stacked Dime Size Barrel Potentiometer6mm diameter top radial control shaft, 8mm diameter bottomRadial control shafts area combined 15.4mm long (tall) from top of threaded bushingThreaded bushing is 8.8mm diameter x 10.2mm long (tall)Dual pots are 16.5mm diameterOverall length is 48mm (tall) Smooth control with NO center detent.This is an “A” audio (logarithmic) taper pot.Traditional mini dime-sized pots, stacked! Independent radial controls for both knobs. This thing packs a huge punch in a small space.25K works perfect for single coil pickups in guitars with active electronics. They’re also great in amps and pedals.Standard ±20% resistance tolerance.

Left handed WD-ALPHA 250K audio pot NEW! FREE SHIPPING!

NEW Left Handed taper WD-ALPHA 250K audio pot. Split (24 Tooth) knurled shaft. Includes nut, lock, and dress washer. Threaded bushing height 3/8 inch. FREE SHIPPING! Check out my other auctions for SGS custom made harness upgrades for guitar & bass, both LEFT and RIGHT handed! Starr Guitar Systems PO Box 3132 Conroe, TX, 77305 WHO WE ARE: Starr Guitar Systems (SGS) owner Dave Starr has been playing guitar and bass professionally (WildeStarr, Vicious Rumors, and CHASTAIN) for over 30 years, and doing guitar repair for over 30 years as well. Dave has put his years of experience as a pro to come up with his own line of guitar & bass electronic upgrade systems. So, when you buy from Dave, you are not just buying gear from a guitar technician… you are buying gear from a PRO MUSICIAN who has been there and done that….. recorded over 15 albums, toured the world multiple times, MTV videos, artist endorsements (currently signed with ERNIE BALL strings and EMG pickups), etc. Every SGS unit comes with all of that experience behind it… what works and what doesn’t, because Dave has pretty much seen and done it all. And, every SGS unit is custom built and assembled by hand one at a time by Dave here in his Houston Texas shop.

Alpha Potentiometer Mini A50K Audio Pot – Single

This listing is for a single (1) pot. Alpha Mini A 50k Audio Taper Potentiometer 6mm split shaft includes dress washer and mounting nut. Threaded bushing is 5/16″ (7.8mm) diameter X 1/4″ (6.35mm) long. Requires a mounting hole diameter of 5/16 (7.94mm). 24.4mm overall from bottom of pot to top of shaft. The pot barrel diameter is a little smaller than a dime, making it great for tight control cavities. These pots are excellent for active electronics, pedals and amps. High quality, made in Korea