USA Strat H/S/S Wiring Harness / Assembly – for Fender Strat with Humbuckers

Tone Hounds H/S/S USA Built Strat Wiring Harness – will fit Fender strat and strat style guitars with normal strat spacingPlease Note: This assembly is spec’d for a 3 pickups strat type with a Humbucker. This will fit H/S/S, H/S/H or H/H/H guitars. It will also be a good fit for someone with hot single coils looking to drive their amp. Tone controls are set up so one tone knob controls bridge humbucker, the other controls neck/mid pickups. This assembly does not split the humbucker coils. Features include:Smooth audio taper 450G Series split shaft CTS Pots with brass shafts/bushings for longest life500k Audio Taper pot for Volume, 250k audio taper pots for tones..022uF Orange Drop CapacitorOak Grigsby 5 Way SwitchPremium Gavitt 22 Gauge AWG Vintage Style Cloth WiringWiring diagram included (see listing pics)Pickup Configuration:Bridge pickup onlyBridge and middle pickupMiddle pickup aloneMiddle and neck pickupNeck Pickup aloneHarness built in California, USA using the highest quality components for the best tone!Old school vintage style harness geared towards humbuckers or combination humbuckers and single coils, this harness will handle it. Tone Hounds assemblies offer immaculate wiring, tested high quality components and are built by me in my Northern California shop. I’ve been doing mods for over 20 years, and learned the craft from a member of the Fender Custom Shop. I also offer other assemblies with Blender Circuits, Orange Drop or PIO capacitors in different values, Eric Johnson, David Gilmour assemblies, treble kits, Les Paul, Tele and P Bass assemblies…just check my other listings. If you have any questions with assembly or what components work best for you, give me a shout. I’ve been on Ebay for over 22 years, check out my feedback and buy with confidence.. Thanks!Guitar mods for guitar players by a guitar player…and of course shipping in the USA is free! Some feedback from buyers of my wired harnesses:Excellent product!! Amazing craftsmanship!! Buy one now!! So pleased!!Just as described!Super fast shipping and great workmanship. Thanks !Well put together Terrific service Highly recommendedVery nice productGood honest sellerFast delivery…product was in good condition. Took 10 minutes to unwrapVery good communication and nice product, thanks!Fast shipping, exactly as described!Excellent item and fantastic seller very responsive and helpful with questions

USA Strat Wiring Harness-Tone Hounds Standard for Fender Strat CTS Oak Grigsby

Tone Hounds Standard USA Built Strat Wiring Harness – will fit Fender strat and strat style guitars with normal strat spacingFeatures include:Smooth audio taper 250k CTS Pots.047uF Orange Drop Capacitor (Please let me know if you would prefer a .022uF)Oak Grigsby 5 Way SwitchPremium Gavitt 22 Gauge AWG Vintage Style Cloth WiringWiring diagram included (see listing pics)Pickup Configuration:Bridge pickup onlyBridge and middle pickupMiddle pickup aloneMiddle and neck pickupNeck Pickup aloneHarness built in California, USA using the highest quality components for the best tone!Old school vintage style harness, this is the harness that started it all. Tone Hounds assemblies offer immaculate wiring, tested high quality components and are built by me in my Northern California shop. I’ve been doing mods for over 20 years, and learned the craft from a member of the Fender Custom Shop. I also offer other assemblies with Blender Circuits, Orange Drop or PIO capacitors in different values, Eric Johnson and David Gilmour assemblies, Les Paul and Tele assemblies, treble kits…just check my other listings. If you have any questions with assembly or what components work best for you, give me a shout. I’ve been on Ebay for over 22 years, check out my feedback and buy with confidence. Thanks!Guitar mods for guitar players by a guitar player…and of course shipping in the USA is free! Some feedback from buyers of my wired harnesses:Excellent product!! Amazing craftsmanship!! Buy one now!! So pleased!!Just as described!Super fast shipping and great workmanship. Thanks !Well put together Terrific service Highly recommendedVery nice productGood honest sellerFast delivery…product was in good condition. Took 10 minutes to unwrapVery good communication and nice product, thanks!Fast shipping, exactly as described!Excellent item and fantastic seller very responsive and helpful with questions

CTS 250K SHORT (1/4″) SOLID SHAFT AUDIO GUITAR POTS – 450G – Bulk Lot of 10

BULK LOT OF TEN (10X) CTS 450G Series 250K Vintage dish back, solid shaft audio taper potentiometers. These are from CTS’s high quality 450G series potentiometers made specifically for guitars, suitable for either volume or tone. Some of the features of these pots include: 10% tolerance Solid brass shaft and bushing vintage-style dish back case Low friction rotation Bakelite base plate Each pot comes with hardware – nut, lock & dress washer. This a short shaft pot (bushing is 1/4″ tall & 3/8″ diameter, shaft is 1/4″diameter). These are typically used for through pick guard or control plate mounting as found in Fender® Stratocasters or Telecasters Pot is manufactured by CTS for The Art Of Tone – Part #450GT25R254A2L If you have questions, please feel free to ask before you bid. To purchase multiple items, please use the cart function. Shipping will be automatically combined by weight. Depending on your location sales tax may apply. RETURNS: If you are dissatisfied with your purchase, you are welcome to return your item. In order to return your item, you must notify us within 30 days of receipt of the item, and provide the Ebay item #, and date of purchase. The item must be received back within 30 days of the date the return was authorized. In order for us to accept returned item, it MUST be unused and in the same condition it was shipped (this means you have not soldered on lugs, clipped leads, tried to fit a square peg in a round hole, etc.). We reserve the right to charge a 10% restocking fee. In instances where factory packaged items are returned open a 50% restocking fee will apply. | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

CTS 450G 250K Brass Short (1/4″) 10% Audio Taper Potentiometers Bulk Lot of 12

CTS 450G series 250K dish back, SPLIT shaft audio taper potentiometers (bulk lot of 12). Low friction rotation with dish back. 10% tolerance. The CTS 450 series is designed specifically for use in guitars. Features high quality construction with brass bushing and brass shaft. Each pot comes with nut, lock and dress washer. These are a short shaft pots (threaded bushing is 1/4″ tall and 3/8″ diameter, fine spline 24-tooth shaft is 1/4″ diameter). Pot is manufactured by CTS for The Art Of Tone. Part #450GT25K254A2L  Great choice for Stratocasters®. Note: This part is sized for American-made guitars and requires a 3/8″ diameter mounting hole.

CTS 250K Pot SHORT SPLIT shaft – Dish Back – Audio Taper – 450G – 1X – Guitar

ONE (1X) CTS 250K Dish Back Audio Taper Full Size Short, split, knurled shaft potentiometer. CTS’s high quality 450G series made specifically for guitar 10% tolerance Standard Audio Taper High quality solid brass shaft and bushing Vintage-style dishback case Low Friction Rotation Pot comes with hardware – nut, lock & dress washer. This is a SHORT shaft pot. Threaded bushing is 1/4″ tall X 3/8″ diameter. 24 tooth fine spline shaft is .236 inch diameter. Requires a 3/8″ mounting hole. NOT SUITABLE FOR IMPORT GUITARS USING METRIC PARTS Pot is manufactured by CTS for The Art Of Tone – Part # 450GT25K254A2LIf you have questions, please feel free to ask before you bid. Offer only available to lower 48 states, Alaska & Hawaii. NO INTERNATIONAL BIDDERS PLEASE. Payment is required within 2 days of purchase To purchase multiple items, please use the cart function.  Shipping will be automatically combined by weight.  We cannot combine your orders once they have been paid for separately..  We usually ship within 24 hours of receipt of confirmed payment. Depending on your location sales tax may apply. California residents will be charged 7.75% sales tax RETURNS: If you are dissatisfied with your purchase, you are welcome to return your item.  In order to return your item, you must notify us within 14 days of receipt of the item, and provide the Ebay item #, and date of purchase.  The item must be received back within 30 days of the date of purchase.   In order for us to accept returned item, it MUST be unused and in the same condition it was shipped (this means you have not soldered on lugs, clipped leads, tried to fit a square peg in a round hole, etc.).  For returns over $25.00, a 10% restocking fee will apply. 

(4) TAOT CTS 500K SHORT SPLIT Shaft Potentiometers + (2) .022/200v Capacitors

We are pleased to offer our own custom branded pots manufactured by CTS. These TAOT Custom Series pots are identical in construction to CTS high quality 450G series pots made specifically for guitars. These audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are:500K Ohms/10% Tolerance Audio TaperBakelite base plateSolid brass c-clip reinforced shaftSolid brass bushing 3/8-32 US thread 3/8″ (short shaft) bushing heightSplit, fine 24-tooth, knurled, 1/4″ diameter shaftChamfered shaft for easier knob installation and removal Each pot comes with hardware – nut, dress washer and lock washer Requires 3/8″ diameter mounting hole Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500K TAOT. Great pots at reasonable price and you can only get them here. Comes with a pair of Orange Drop .022 @ 200v. Ideal choice for Les Paul’s and other humbucker equipped guitars Note:1. If you are uncertain whether your guitar uses short (3/8″) or long (3/4″) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul’s manufactured before 1977, Gibson historic reissues, PRS and Hamer guitars, but please double check before you order.2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you’ve ever had that happen…3. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.

CTS 500k Potentiometer – 10% Audio Taper – 20% Tolerance (x1)

1X (Single) CTS 450G 500K SHORT/split, knurled shaft, audio taper potentiometer. This 10% audio taper pot is suitable for both tone and volume controls. Some of the features of this pot are:500K Ohms/20% Tolerance10% Audio TaperBakelite base plateSolid brass c-clip reinforced shaftSolid brass bushing3/8-32 US thread3/8″ (short shaft) bushing heightSplit, fine 24-tooth, knurled, 1/4″ diameter shaftChamfered shaft for easier knob installation and removalEach pot comes with hardware – 2 nuts, dress washer and lock washerRequires 3/8″ diameter mounting hole Pot is manufactured and branded by CTS , Part # 450GT36K504B2S. Note:If you are uncertain whether your guitar uses short (3/8″) or long (3/4″) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul’s manufactured before 1977 and historic reissues, but please double check before you order.Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot.. If you have questions, please feel free to ask.