1 Humbucker Solderless Harness Coil Split 3/w Tone Pot Bourns 500k KellingSound
Tone Bourns 500k push pull with 3 Tone settings. 1 Humbucker Solderless Wiring Harness, Requires a 4 wire humbucker. Turned down to 0 its a mid scoop filter.
1 Volume Solderless Guitar wiring harness w/ push pull tone setting KellingSound
1 Volume pot Solderless Guitar wiring harness , Bourns 500k push pull with fixed tone setting when pulled up with a .015 capacitor, it also makes the pot 350k at the same time as adding the fixed tone cap this gives you 2 very different sounds out of one pot with only one pickup , this will work with a Humbucker or P90 . The jack wire is 6 inches and is a Switchcraft jack. Each item is custom made by me personally to order. Please ask any questions before you purchase.
Solderless SG Harness Bourns pots PTB Tone Circuit Bass/Treble Control
This Solderless SG Harness will fit Epiphone or Gibson. All pots are Bourns A500k. Both volume pots have a .0022 cap and 100k resistor , tone circuit bass control treble control tone pots , 3 way toggle switch an Switchcraft jack all wired with push back wire . All you need is a small screwdriver to install the pickups. It comes with a instructions. Everything is made to order , 5 Business days handling time on all orders
Coil Split Tone pot , Adjustable Trim pots for Half Split Bourns 500k P/P .022
Pre-wired Bourns 500k push pull coil split tone pot . 022 tone capacitor. This is wired with 10k trim pots for each pickup coil split this let’s you adjust for half split.
Explorer Wiring Harness Bourns A500k Pots Right angle Toggle .033 PIO Cap
Explorer Wiring Harness Bourns A500k pots, Treble bleed circuits for both Volume, .033 PIO Tone cap , Gotoh Right angle Toggle, Switchcraft jack Everything is made to order and has a 5 business day handing. All orders come with installation instructions.
Mosrite Guitar Solderless Wiring Harness Bourns A500k Pots .033 PIO Cap
Mosrite Solderless Wiring Harness, Bourns A500k 3/8 pots treble bleed circuit for volume, .033 PIO Tone capacitor ,Gotoh right angle toggle switch , Switchcraft Jack . Everything comes with instructions , 5 day Business days handling time on all items.
10x Rare Bourns C500k Solid Shaft Pots ( Reverse Audio Taper) Lefthand Wiring
10x Rare Bourns C500k Solid shaft pots, reverse audio taper, great for Lefthand wiring harnesses , comes with nuts and washers. 19mm Shafts
Custom SG Solderless Harness 3 Pickups 6 way Switch Bourns Out of Phase P/P
This SG Solderless Harness 6 way Rotary Switch wiring will fit Epiphone or Gibson. All pots are Bourns A500k. 2 Bridge and Middle. 6 Neck and Bridge. 4 Middle and Neck.
SG Harness 500k Bourns pots .022 Orange Drop Treble bleeds KellingSound
This SG Harness will fit Epiphone or Gibson. All pots are Bourns A500k. Both volume pots have a .0022 cap and 100k resistor , tone pots have a .022 Orange Drop, these are high end audio caps 3 way toggle switch an Switchcraft jack all wired with push back wire . It comes with a diagram. Everything is made to order , 5 Business day shipping time . Items that have been soldered on are not returnable, please contact me if you have a problem oncean item has been soldered.
Gibson EB-3 Solderless Harness Passive Fuzz+Bass cut Neck Setting KellingSound
Gibson EB-3 Solderless Wiring Harness with a 4 way rotary switch and Chicken head knob. All pots are Bourns 500k two are push pull. The bridge tones cap is. 22 it is a push pull pot in up it gives fuzz on the bridge only.