ObsidianWire Tele Custom Universal pre-wired kit for HH, HS, SH & SS

ObsidianWire Tele Custom Universal pre-wired kit for HH, HS, SH & SS The ObsidianWire Tele Custom Universal pre-wired kit for HH, HS, SH & SS FOR HUMBUCKER LOADED TELECASTERS® Traditional 3-Way Tele® switching Built for Humbucker Loaded Telecasters 4 Optimized Modes (HH, HS, SH & SS) Improves clarity for humbuckers Balances single coils Fits Fender® Telecaster® Fits Squier® Telecaster® with adjustments Super Easy, Solder-less Install All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWire Plug, Play & Enjoy connectors FOR HUMBUCKER LOADED TELECASTERS® This wiring harness is a universal model made to be a perfect set for your humbucker loaded Telecaster, with an added fourth mode for two single coils for ultimate versatility. Just select your mode from the Obsidian Smart switch, and you are set. This harness is the perfect match for you if you have Telecaster loaded with the below pickups Mode 1. HH Tele® (Humbucker + Humbucker) Mode 2. HS Tele® (Humbucker Bridge + Single Coil Neck) Mode 3. SH Tele®(Single Coil Bridge + Humbucker Neck) Mode 4. SS Tele® (Two Single coils / traditional Tele® mode) Why have different modes? Humbuckers and single coils have different characteristics that require different things from a wiring harness to really let out their best qualities. The Obsidian® Universal for Tele® harness allows you to easily setup your harness to automatically optimize the controls for each switch position, and thus, each of your pickups. 500k Controls for your humbuckers – Clearer, fuller humbucker output. More resistance through your tone and volume controls means less treble escapes. 250k Controls for your single coils – Balanced single coil spank. The harsh highs of a raw single coil are sent to ground, leaving a harmonically rich but balanced single coil sound. The Four Modes Explained MODE 1: HH Telecaster (Two Humbuckers) Turn the dial to ‘HH’ for your Telecaster loaded with double humbuckers. You will get an optimized set of tone and volume controls with 500k pots, and a 0.022uf capacitor, for full clear output in all three switch positions. Master Volume & Tone controls: (500k for full clear output) MODE 2: HS Telecaster (Humbucker Neck + Single Coil Bridge Pickup) Turn the dial to ‘HS’ for your Telecaster loaded with a humbucker in the neck position, and a single coil in the bridge position. You will get an optimized set of tone and volume controls with 500k pots for the humbucker for full clear output, and 250k pots for the single coil position to help tame the excess highs. Switch Positions 1: Bridge Pickup (250k balances single coil highs)2: Bridge + Neck Pickup (250k optimized for humbucker & single coil mix)3: Neck Pickup (500k for full clear output) MODE 3: SH Telecaster (Humbucker Bridge + Single Coil Neck Pickup) Turn the dial to ‘SH’ for your Telecaster loaded with a humbucker in the bridge position, and a single coil in the neck position. You will get an optimized set of tone and volume controls with 500k pots for the humbucker for full clear output, and 250k pots for the single coil position to help tame the excess highs. Switch Positions 1: Bridge Pickup (500k for full clear output)2: Bridge + Neck Pickup (250k optimized for humbucker & single coil mix)3: Neck Pickup (250k balances single coil highs) MODE 4: SS Telecaster ( Two Single Coils) Also perfect for Single coil sized humbuckers Call this bonus mode, just in case you ever want to convert your Tele back to a traditional SS, or two single coil Telecaster. This mode will give you a set of standard 250k controls with a 0.022uf capacitor for balanced tone and volume controls. This is also perfect for using single coil sized humbuckers, which are often designed to work best with 250k pots. Master Volume & Tone controls: (250k for full clear output) CRYSTAL CLEAR TONE To make your tone crystal clear at lower volumes we also include an Obsidian® Custom Spec Treble Bleed Mod. This prevents tone ‘muddiness’ at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. COMPONENTS Potentiometers: Obsidian® Custom CTS® Pots (+/-10%) Split Shaft 24 Spline with 1/4″ AdaptersCapacitors: (150 Series Polyester Film 0.022uf) (+/-5%)Switch: Genuine Oak® 3 Way SwitchJack: Pro-Wired Switchcraft® J11 Mono COMPATIBILITY American series Fender® Telecasters – Direct Fit Mexican series Fender® Telecasters – Direct Fit Japanese Fender & Squiers – You will need to purchase a genuine Fender USA control plate and new 1/4″ knobs or ObsidianWire Control plate & Knobs Pickups: Works with Single coils, single coil sized humbuckers, humbuckers and P90s. Coil Split Upgrade Requires compatible – Four Conductor Pickups Does NOT Fit: – Thinline Telecaster – G & L ASAT – May be fitted with adjustments to control slot size & new genuine Fender USA control plate and new 1/4″ knobs or ObsidianWire Control plate & Knobs – Other Guitars – We cannot guarantee that these will fit any other guitar. Note: Aftermarket control plates will NOT fit. We recommend a genuine Fender control plate – Part Number: 099-2058-000 or ObsidianWire Control plate Use US spec 1/4″ Solid shaft controls such as ObsidianWire Knobs . We recommend that you check your knobs are the correct size and replace them if necessary.

ObsidianWire Custom HSS / HSH for Strat 7-Way Switch Gen 2 pre-wired kit

ObsidianWire Custom HSS / HSH for Strat 7-Way Switch Gen 2 pre-wired kit ObsidianWire Custom HSS / HSH for Strat 7-Way Switch Gen 2 pre-wired kit OPTIMIZED FOR HUMBUCKER & SINGLECOILS When building a Strat with a mix of humbuckers and single coils, there is a toss up between choosing 500k controls which will retain the life of a humbucker, or 250k controls which will tame the harsh highs that are inherent in single coils. We say ‘why choose? ‘. The Obsidian® Custom HSS-7 has some clever wiring, which harnesses the power of a 7 way superswitch, and a couple of extra resistors to add new life to your humbucker, as it sees the 500k controls that it deserves. Move through the switch positions it and automatically switches back to 250k for the single coils, so you still get the full and clear rhythm and spank that Stratocasters® are famous for. Furthermore, when you move your switch into the two pickup switch positions the humbucker coils split, with one of them pairing up with the middle pickup for a traditional second position Strat tone. Switch Positions HSS Mode: Optimized for Humbucker Bridge Pickup + Two Single Coils 1: Bridge humbucker in full mode (500k)2: Bridge humbucker in split mode + middle (250k)3: Middle (250k)4: Middle + neck (250k)5: Neck (250k) HSH Mode: Optimized for Humbucker Bridge & Neck Pickups + Middle Single Coil 1: Bridge humbucker in full mode (500k)2: Bridge humbucker in split mode + middle (250k)3: Middle (250k)4: Neck humbucker in split mode + middle (250k)5: Neck humbucker in full mode (500k) 7-Way Switching: Play Your Neck & Bridge Pickups Together The Obsidian® HSS wiring harness can now be even better with the new option to add a push pull switch to the second tone control. This allows you to play your neck and bridge pickups together, or even all three pickups at once. Tone Controls Control 1: Master Volume (auto splits 250 for Single coils & 500k for Humbucker)Control 2: Tone Control 1 (Neck & Middle) 250k No Load Pot & 0.022uf CapacitorControl 3: Tone Control 2 (Bridge) 500k Pot & 0.022uf Capacitor Crystal Clear Tone To make your tone crystal clear at lower volumes we also include an Obsidian® Custom Spec Treble Bleed Mod. This prevents tone ‘muddiness’ at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. COMPONENTS Potentiometers: Obsidian® Custom CTS® Pots (+/-10%) Split Shaft / 24 SplineCapacitors: (150 Series Polyester Film 0.022uf) (+/-5%)Switch: Obsidian® Schaller® Propriety Switch (Requires Metric Tip)Jack: Pro-Wired Switchcraft® J11 Mono Compatibility Fits: Fender® Stratocaster® – Direct Fit // Right Hand Guitar OnlyFits: Squier® Stratocaster® – Widen Control holes to 10mm & replace knobsKnobs: Requires US spec 24 spline knobs Pickups: Built for HSS or HSH Loaded Strat® (Humbucker bridge pickup + two single coils or Humbucker Neck & Bridge + middle single coil) Coil splitting: Requires compatible four conductor humbucker(s) Does NOT fit: Left Handed Guitars // Any guitar not described above

ObsidianWire Tradition Vintage for Jazz Bass pre-wired kit – 250k CTS pots

ObsidianWire Tradition Vintage for Jazz Bass pre-wired kit – 250k CTS pots The ObsidianWire Traditional Vintage Plus for Strat pre-wired solderless kit – 250k CTS pots & 0.047uf cap ObsidianWire Traditional Vintage Pro-Wired Electronics for Jazz Bass are a pop in replacement for your old J bass wiring harness. The upgrade plays homage to the original design that Leo first started crafting back in 59. We take the design a few steps further with some minor adjustments to improve play-ability, and of course your sound. Best of all, these are super easy to install, and allow for unlimited solder-less pickup changes with ObsidianWire Plug, Play and Enjoy connectors. The Heritage of Traditional Vintage Pro-Wired Electronics for Jazz Bass: ObsidianWire Traditional Vintage Pro-Wired Electronics follow the same tried and true formula of the original Jazz Bass with the addition of premium selected and hand matched components for greater clarity and control over your tone. To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone ‘muddiness’ at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. We build ObsidianWire Pro-Wired Electronics using the world’s best craftsmanship and components: 3 x ObsidianWire Custom Select Pots (Crafted by CTS) 250k or 500k (+/-6%) (Matched to +/-2%) SOLID SHAFT 1 x Genuine Switchcraft J11 Mono Output jack 1 x ObsidianWire Custom Select Capacitor (NOS K42Y-2 0.047uf) or (150 Series Polyester Film 0.022uf) (Hand Tested to +/-10%) 1 x ObsidianWire Premium Selected Volume Mod / Treble Bleed – Improved Volume Taper & Clarity 1 x Pre Printed & Easy to Follow Wiring Diagram Compatibility: ObsidianWire Pro-Wired Electronics for Jazz Bass, are designed to be a direct fit for American and Mexican series Fender® basses. They can also be used to upgrade Japanese Fender & Squier guitars with some adjustments. In the least, you will need a new genuine Fender USA control plate and new 1/4″ knobs to fit the higher grade electronics. We cannot guarantee that these will fit any other guitar. Note: aftermarket control plates do not have the correct Fender spec spacing and as such will not fit our electronics. We recommend a genuine Fender plate – Part Number: 099-2058-000 At ObsidianWire we use US spec 1/4″ Solid shaft controls. We recommend that you check your knobs are the correct size and replace them if necessary.

ObsidianWire The Ultimate for Les Paul JP Mod Wiring pre-wired kit

ObsidianWire The Ultimate for Les Paul JP Mod Wiring pre-wired kit ObsidianWire The Ultimate for Les Paul JP Mod Wiring pre-wired kit ‘The Ultimate’ Wiring for Les Paul® // ‘JP’ Mod ‘The Ultimate’ wiring for Les Paul® is a full featured and comprehensive wiring upgrade, designed to give you all of the best Les Paul sounds in one setup. Based on the wiring used by Jimmy Page, but even more versatile. The extra sounds are activated using three push / pull pots, so no extra mods are required to the body of your guitar. REQUIRES FOUR CONDUCTOR PICKUPS FEATURES: ‘VINTAGE 50’S’ MODE Allow for some treble roll off when you roll back your volume control for an easy bridge between perfect warm cleans and searing leads. The ‘Vintage 50’s’ wiring mod is a super popular Les Paul wiring upgrade that reverts your stock LP wiring back to the glory days, and the beginning of the Vintage Les Paul. This is our most popular and personal favorite Les Paul wiring. ’60’S PLUS’ MODE Prevent treble loss when you roll back the volume for greater clarity and cut through at reduced volume levels. The Obsidian® ’60’s Plus’ wiring is made for clarity and cut through with an improved circuit that will help you retain treble at all volume levels. DUAL SC (COIL SPLIT) Turn your humbuckers in to single coils, and back againTo add true versatility to your guitar we build in Obsidian® Dual SC, allowing you to split your humbuckers in to single-coils for lower output, more dynamic tones. // Controlled by Neck Volume Control ‘SERIES’ MODE SWITCHING Play your neck and bridge pickups in Series for a fuller output sound with a boosted midrange. // Controlled by Neck Tone Control NOTE: This also mutes the bridge/lead pickup when played alone PHASE SWITCHING Play your neck and bridge pickups out of phase for those classic Les Paul sound made famous by Brian May and Jimmy Page. // Controlled by the Bridge Tone Control Specs Potentiometers: ObsidianWire® Custom CTS® 500k Pots (+/-10%) Split Shaft / 24 Spline Capacitors: (0.022uf) (+/-5%) Switch: ObsidianWire® Pro-Wired Toggle Switch Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in Components Potentiometers: Obsidian® Custom CTS® 500k Pots (+/-10%) Split Shaft / 24 SplineCapacitors: (150 Series Polyester Film 0.022uf) (+/-5%)Switch: Obsidian® Select Pro-Wired Toggle SwitchJack: Pro-Wired Switchcraft® J11 Mono COMPATIBILITY Requires Four Conductor PickupsMADE TO FIT Gibson® Les Paul® MOST Epiphone® Les Paul® NOT compatible with 90s Korean built Les Paul.NOT compatible with three pickup Les Paul. Hole Size: 3/8″ (9.5mm) mounting holes Knobs: Use Only US spec 24 spline knobs (Do NOT use metric / ‘Import’ style knobs Pickups: Requires Four Conductor Pickups DOES NOT FIT Does NOT fit: Lefty, three pickup Les Paul®, or any other guitar or Les Paul® Copy.

Obsidian Wire Universal 3-Way Solderless Wiring Harness for Tele/Telecaster

EXCLUSIVE SELLER DISCOUNT: EXTRA 10% OFFWHEN YOU BUY 4 OR MORESee all eligible items SAME-DAY SHIPPINGWhen purchased by 12:00 PM NOON EST (M-F) 60 DAY FREE RETURNS(United States Orders Only) REAL SUPPORTMusicians helping Musicians EXPERIENCED SELLEROver 65,000 Satisfied eBay Customers Obsidian Wire Universal 3-Way Solderless Wiring Harness for Tele/Telecaster Authorized DealerBRAND NEWBRAND: ObsidianWire | SKU: T3-UNIVERSAL Product Description FOR HUMBUCKER LOADED TELECASTERS® Traditional 3-Way Tele® switching Built for Humbucker Loaded Telecasters 4 Optimized Modes (HH, HS, SH & SS) Improves clarity for humbuckers Balances single coils Fits Fender® Telecaster® Fits Squier® Telecaster® with adjustments Copyright © 2022 Guitar Audio | All Rights Reserved

ObsidianWire T4 Custom 4-Way for Tele pre-wired kit – 250k CTS pots

ObsidianWire T4 Custom 4-Way for Tele pre-wired kit – 250k CTS pots The ObsidianWire T4 Custom 4-Way for Tele pre-wired kit – 250k CTS pots & 0.047uf cap The ObsidianWire Custom 4-Way harness for Telecaster® gives you all the fun of the traditional vintage Tele®, whilst adding a tasty fourth switch position to make it scream. Best of all, these are super easy to install, and allow for unlimited solder-less pickup changes with ObsidianWire Plug, Play and Enjoy connectors. The Custom 4-way harness follows a tried and true formula, giving your Tele the familiar master tone, master volume and three positions that we all know and love. Plus a little extra. Kick your Tele into the new fourth position and your old work horse becomes a beast with the neck and bridge pickups working in series to provide a more powerful humbucker like tone. You can use this position for stronger rhythm and screaming leads. Custom 4-Way for Tele Positions: 1: Neck & Bridge Pickup in Series (Humbucker Like Tone) 2: Neck Pickup Only 3: Neck & Bridge Pickup in Parallel (Traditional Tele) 4: Bridge Pickup Only To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone ‘muddiness’ at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. ObsidianWire Pro-Wired Electronics use the world’s best craftsmanship and components: • 2 x ObsidianWire Custom Select Pots (Crafted by CTS) 250k (+/-6%) (Matched to +/-2%) SOLID SHAFT• 1 x Genuine Oak Grigsby 4-Way Switch• 1 x Genuine Switchcraft J11 Mono Output jack• 1 x ObsidianWire Custom Select 150 Series Polyester 0.022uf Film Capacitor (Hand Tested to +/-10%)• 1 x ObsidianWire Premium Selected Volume Mod / Treble Bleed – Improved Volume Taper & Clarity• 1 x Pre Printed & Easy to Follow Wiring Diagram Compatibility: ObsidianWire Pro-Wired Electronics for Telecaster, are designed to be a direct fit for American and Mexican series Fender® Telecasters. They can also be used to upgrade Japanese Fender & Squier guitars with some adjustments. In the least, you will need a new genuine Fender USA control plate and new 1/4″ knobs to fit the higher grade electronics. We cannot guarantee that these will fit any other guitar. Note: aftermarket control plates do not have the correct Fender spec spacing and as such will not fit our electronics. We recommend a genuine Fender plate – Part Number: 099-2058-000 At ObsidianWire we use US spec 1/4″ Solid shaft controls. We recommend that you check your knobs are the correct size and replace them if necessary. *THREE WIRE NECK PICKUP MOD – To properly ground your neck pickup you will need to add an additional wire to it. This is an easy mod & we provide the instructions and wire to do the job but it does require a solder joint. Please allow for this when buying this upgrade.

ObsidianWire Vintage MKII Les Paul selectable 50’s / 60’s pre-wired kit

ObsidianWire Vintage MKII Les Paul selectable 50’s / 60’s pre-wired kit The ObsidianWire Vintage MKII Les Paul selectable 50’s / 60’s pre-wired kit The new ObsidianWire MKII Wiring Harness for Les Paul®, allows you to auto switch between 50s & 60s wiring layouts, without having to take anything apart or do any soldering. Just flick the dedicated switch to select your preffered option.Each pickup gets its own switch, so you can even run 50’s wiring on the neck and 60’s wiring on the bridge & vica versa. Vintage 50s Wiring Rich Warm Clean Tones & growling crunch. The 50’s LP® wiring mod is a super popular upgrade that reverts your LP® wiring harness to the glory days of the Vintage Les Paul®.It allows for the perfect amount of treble roll off when you wind back the volume control, for smoothly moving between warm clean tones and growling crunch. Modern 60s Wiring Clarity at All Volumes & Sering LeadsThe ObsidianWire Modern 60s wiring is an improved formula compared to standard modern LP® wiring, designed to prevent treble loss when you roll back the volume. The result is greater clarity and cut through at all volume levels. ObsidianWire Pro-Wired Electronics are built using the world’s best craftsmanship and components: 4 x Premium Selected CTS Split Shaft Pots 500k (+/-6%) (Matched to +/-2%) (Long Shaft with extra nuts can be used with long shaft or short shaft guitars) 1 x Genuine Switchcraft Short Toggle Switch (Pro-Wired for use in Gibson® Les Pauls® + Epiphone® Les Pauls® with a little modification) 2 x Obsidian Select Capacitors (150 Series Polyester Film 0.022uf) (Hand Tested to +/-10%) 1 x Genuine Switchcraft J11 Mono Output jack 1 x Pre Printed & Easy to Follow Wiring Diagram 1 x Endless Customer Support ObsidianWire Pro-Wired Electronics for Les Paul, are designed to be a direct fit for American Gibson® Les Pauls®. They can also be used and are a great upgrade for Epiphone® Les Pauls. Please note that for Epiphones you will need to widen the holes in the body for the higher grade, US spec electronics and get new 24 spline knobs to fit. Attempting to use your old metric knobs will damage your new Pro-Wired Electronics.

ObsidianWire Vintage MKII Les Paul 50’s / 60’s Dual Split Coil pre-wired kit

ObsidianWire Vintage MKII Les Paul selectable 50’s / 60’s Dual Split Coil pre-wired kit ObsidianWire Vintage MKII Les Paul selectable 50’s / 60’s Dual Split Coil pre-wired kit ‘Vintage 50’s’ & ’60’s Plus’ Wiring in ONE… AUTO SELECT WITH THE FLICK OF A SWITCH The all new Obsidian® Vintage MKII for Les Paul® combines the super our ‘Vintage 50’s’ and ’60’s Plus’ wiring for Les Paul® in to one product. You can now choose between the vintage roll back of the traditional ‘Vintage 50’s’ harness, and superior clarity of the more modern ’60’s Plus’ wiring with the flick of the switch. “Easily Switch Between Vintage 50s Wiring and the our own ’60’s Plus’ Wiring” Even better, you get a switch for each pickup, so if you want to run a ‘Vintage 50’s’ setup on the neck pickup, and an Obsidian® ’60’s Plus’ setup for the bridge pickup, YOU CAN. What is ‘Vintage 50’s’ LP Wiring? Allow for some treble roll off when you roll back your volume control for an easy bridge between perfect warm cleans and searing leads. The ‘Vintage 50’s’ wiring mod is a super popular Les Paul wiring upgrade that reverts your stock LP wiring back to the glory days, and the beginning of the Vintage Les Paul. This is our most popular and personal favorite Les Paul wiring. What is ’60’s Plus’ LP Wiring? Prevent treble loss when you roll back the volume for greater clarity and cut through at reduced volume levels. The Obsidian® ’60’s Plus’ wiring is made for clarity and cut through with an improved circuit that will help you retain treble at all volume levels. NOW WITH DUAL ‘SC (SPLIT COIL) UPGRADE OPTION: Requires Compatible Split Coil (Four Conductor) Pickups Split your humbuckers into single coils for classic, low output spank, and back again with a tap of the volume control. The Obsidian® Custom SC for Les Paul® gives you greater tonal diversity, through the power of inbuilt coil splitting switches. The upgrade comes with sturdy solder-less connectors, so it can be installed by anyone. WHAT IS COIL SPLITTING? Humbuckers are built with two coils of tightly wound copper, for low noise, and high output. Coil splitting cuts the link between the two coils, so we can play with one half of the humbucker. This essentially gives us a single coil, for traditional Strat® or Telecaster® sounds. “SWITCH BETWEEN LES PAUL & STRAT® OR TELE® LIKE SOUNDS” The Obsidian® Custom SC gives you a switch built in to each volume control, for switching between your traditional LP® humbucker output, and lower output Strat® or Tele® tones. BOTH SWITCHES DOWN Position 1: Bridge Humbucker Position 2: Bridge Humbucker + Neck Humbucker Position3: Neck Humbucker BOTH SWITCHES UP Position 1: Bridge Single Coil Position 2: Bridge Single Coil + Neck Single Coil Position3: Neck Single Coil NECK VOL. UP – BRIDGE VOL. DOWN Position 1: Bridge Humbucker Position 2: Bridge Humbucker + Neck Single Coil Position3: Neck Single Coil NECK VOL. DOWN + BRIDGE VOL. UP Position 1: Bridge Single Coil Position 2: Bridge Single Coil + Neck Humbucker Position3: Neck Humbucker Components Potentiometers: Obsidian® Custom CTS® 500k Pots (+/-10%) Split Shaft / 24 SplineCapacitors: (150 Series Polyester Film 0.022uf) (+/-5%)Switch: Obsidian® Select Pro-Wired Toggle SwitchJack: Pro-Wired Switchcraft® J11 Mono COMPATIBILITY Fits: Gibson® Les Paul® Fits: MOST Epiphone® Les Paul® (Requires new knobs and wider holes)Hole Size: 3/8″ (9.5mm) mounting holesKnobs: Use Only US spec 24 spline knobs (Do NOT use metric / ‘Import’ style knobsPickups: Works with Humbuckers and P90s // with modern or vintage braided wires.Coil Splitting: Requires Compatible four conductor pickups Does NOT fit: Lefty, three pickup Les Paul®, or any other guitar or Les Paul® Copy.