NOS Lot of 5 Switchcraft 112AX 1/4″ / 6.35mm Jack Socket 3 Pole Mono – Switched
NOS Lot of 5 Switchcraft 112AX 1/4″ / 6.35mm Jack Socket 3 Pole – Mono – Switched New old stock surplus
NOS Lot of 5 Switchcraft 112AX 1/4″ / 6.35mm Jack Socket 3 Pole – Mono – Switched New old stock surplus
Hello, these are new old stock Switchcraft jacks from the 70s that I discovered in storage. They have been safe from the elements and come with the original manufacturers identification tag on each. These are specifically Switchcraft 13E JAX, which are Mono jacks with a built in bypass which can either be used or defeated/ignored, depending on your application. These would be perfect for vintage music equipment or radio repair. While the connection points all appear very clean, I would still advise cleaning the jack and contact points before soldering and installation. As this is a vintage item, and like all my vintage items, I cannot make any guarantees and they are sold as-is, refunds/returns at my discretion. Note also: manufacture tags will vary slightly in wear by unit, and some small patina marks are on some jacks, yours will be selected at random from the available stock. Thank you!
2 PCS Switchcraft #11 I/O Guitar Jack – 1/4″ Mono (2x)
With this listing you will receive 5 pcs of genuine Switchcraft Model # 12A – Mono 1/4 Jacks with shunt switch for tip
Combined Shipping on all orders. Flat fee shipping! No addition cost per item. Solderless SwitchCraft Output Jack. Will come pre-assembled for easy installation. Includes: SwitchCraft Stereo output jack black & white connect cable with push on terminals on one end an spade connector on the other. Hard T type 9 Volt connector with spade connector on black wire and push on terminal on red wire. Plug and play with EMG solderless systems. includes basic instructions. Follow EMG’s wiring diagrams for proper installation for your setup. Cable length is approx. 6″ This is an aftermarket part. Not affiliated or endorsed by EMG, Seymour Duncan or Fishman. Check out our store for more great parts! Except as set forth in the item description seller disclaims any and all warranties about this item, express or implied. In the event of seller error or fault, seller will only be responsible for original purchase cost only. Due to variations between monitors/screens colors may not be accurate true to life representation of said colors.
One (1) Switchcraft L-type 3-way toggle switch. Comes with flat knurl nut, cream switch tip IS included. This switch is used in Gibson SG’s and can also be used in semi-hollow body guitars where depth is an issue. Note: This part is sized for American made guitars, if you have an imported guitar you may need to enlarge the opening slightly. The Switchcraft toggle switch comes with a flat nut, depending on the thickness of the body of the guitar, you made need the “vintage-style” deep nut, which you would need to purchase separately. If you have questions, please feel free to ask before you bid. Use the shopping cart to purchase multiple items, shipping totals are calculated by combined weight. Depending on your location sales tax may apply. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application RETURNS: If you are dissatisfied with your purchase, you are welcome to return your item. In order to return your item, you must notify us within 30 days of receipt of the item, and provide the Ebay item #, and date of purchase. The item must be received back within 30 days of the date the return was authorized. In order for us to accept returned item, it MUST be unused and in the same condition it was shipped (this means you have not soldered on lugs, clipped leads, tried to fit a square peg in a round hole, etc.). We reserve the right to charge a 10% restocking fee. In instances where factory packaged items are returned open a 50% restocking fee will apply.
One (1) Switchcraft L-type 3-way toggle switch. Comes with flat washer, black switch tip IS included. This switch is used in Gibson SG’s and can also be used in semi-hollow body guitars where depth is an issue. Note: This part is sized for American made guitars, if you have an imported guitar you may need to enlarge the opening slightly. The Switchcraft toggle switch comes with a flat nut, depending on the thickness of the body of the guitar, you made need the “vintage-style” deep nut, which you would need to purchase separately. If you have questions, please feel free to ask before you bid. Offer only available to lower 48 states, Alaska & Hawaii. NO INTERNATIONAL BIDDERS PLEASE. Payment is required within 2 days of purchase Use the shopping cart to purchase multiple items, shipping totals are calculated by combined weight. We cannot combine orders once you have paid for items separately. I usually ship within 24 hours of receipt of confirmed payment. Depending on your location sales tax may apply. California residents will be charged 7.75% sales tax Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application RETURNS: If you are dissatisfied with your purchase, you are welcome to return your item. In order to return your item, you must notify us within 30 days of receipt of the item, and provide the Ebay item #, and date of purchase. The item must be received back within 30 days of the date the return was authorized. In order for us to accept returned item, it MUST be unused and in the same condition it was shipped (this means you have not soldered on lugs, clipped leads, tried to fit a square peg in a round hole, etc.). We reserve the right to charge a 10% restocking fee. In instances where factory packaged items are returned open a 50% restocking fee will apply.
Switchcraft 3-Way Short Toggle Made in USA Includes Genuine Cream Switchcraft Tip Durable nickel-plated steel frame 3/8″ long threading for thicker bodies Pre-tinned at the factory for easy soldering Includes knurled mounting nut Requires at least 1″ cavity depth Buy with confidence. We are an Authorized Switchcraft Dealer. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. Although we ship by next business day, please be patient as delivery times are often extended for international shipments, including Canada. Thank you. </fon
One (1) Switchcraft SHORT straight 3-way toggle switch. Comes with knurled nut. (Genuine Switchcraft Black tip is included) Part is USA-made. Note: Switchcraft pre-tins all lugs at the factory, that is the trace solder you see on the lugs. This part requires 1/2″ diameter hole for mounting. The Switchcraft toggle switch comes with a flat nut, depending on the thickness of the top of the guitar, you made need the “vintage-style” deep nut, which you would need to purchase separately. If you have questions, please feel free to ask before you bid. To purchase multiple items, please use the cart function. Shipping will be automatically combined by weight. We cannot combine your orders once they have been paid for separately. Depending on your location sales tax may apply.