Tesi Premium Dual Concentric Guitar Knob Set – Volume, Tone – Cosmo Black

This premium knob set will fit perfectly on the Tesi Alpha dual concentric pots, but not some CTS pots. Check your pot dimensions. Lower knob dimensions:Inside shaft diameter: 8mmOutside knob diameter: 19mmHeight: 12.5mm Upper knob dimensions:Inside shaft diameter: 6mmOutside knob diameter: 15mmHeight: 14mm Includes the allen wrench needed to set the knob in place. Available in Chrome, Black, Cosmo Black (black nickel) and Gold.

Tesi Stratocaster Knob Set – Red, No Ink – Stealth Red

Tesi Premium Guitar Accessories are designed to make your guitar stand out, or fit in. Whatever it is you’re trying to accomplish, Tesi can help. The question is how much more red can this knob get? And the answer is none. None more red. These traditional plastic Strat knobs are designed to fit a split-shaft potentiometer. Includes one volume and two tone knobs. They’ll go beautifully on a Strat, or other guitars too! Like Fender, Charvel, Jackson, Ibanez, ESP, Schecter, Keisel Carvin, and custom built jobs!

Tesi POCO 12MM LED Momentary Push Button Guitar Kill Switch Stnls Steel/White

THIS LISTING IS FOR THE 12MM POCO KILL SWITCH IN STAINLESS STEEL WITH WHITE LED. To see what other colors are available, please visit my other listings. Specs:Type: Momentary Push Button SwitchOperation Type: Normally Open (yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)Housing Material: Stainless SteelMounting hole Size: 12mmMounting Panel Thickness: 1mm-6mmOperation Pressure: about 5nOperation Stroke: 2.5mmLED Rated Voltage: 6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring) *note: This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.LED Life: About 40,000 hoursLED Power Draw: 15mAContact Resistance: 50 mOhmMechanical Life: 500,000 cyclesSwitch Rating: 2A/36VDC What does all this mean? You’re getting a tough switch that will last a long time in your instrument and look good doing it! The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it. The mounting hole is slightly larger than a standard volume or tone pot (12MM vs. 9MM) which means that if you decide to go back to your original setup, you don’t have to buy a new pickguard or repair that hole in your wood. This package comes with everything:(1) Tesi POCO 12mm Momentary Guitar Kill Switch (1) Tesi Quick-Connect wiring Bundle that includes: (1) Black/Black ground wire (1) Black/White hot wire (1) White/Red Power wire with resistor (1) 9V Battery Harness with resistor (1) On/Off Rocker Switch(1) Set of easy-to-follow wiring instructions(2) Spare 270 Ohm resistors for custom wiring jobs When used with active pickups and/or a stereo output jack (not included) the Tesi POCO does not require the additional on/off rocker switch. Each Tesi Guitar Kill Switch is guaranteed against defect for one year from the date of sale. Contact us for more details. The Tesi Switch Difference:We test every switch before packaging it. As a result, the failure rate is less than 1%. We package the 12MM and larger switches in a custom cut foam block and place in a small box for protection. The box also includes a couple of Tesi Switch guitar picks, as well as all the wiring necessary to install in an active or passive system, and we are always happy to help with installation questions. If something does go wrong, our switches have a 1-Year Guarantee against defect or failure. PLEASE NOTE: Do not try to connect the switch directly to a battery. The LED is a 6V bulb and requires a resistor with a minimum value of 270 Ohms to work with a 9V battery. Using a 9V battery without the resistor voids the warranty on the switch.

Tesi POCO 12MM LED Momentary Push Button Guitar Kill Switch Black/White

THIS LISTING IS FOR THE 12MM POCO KILL SWITCH IN BLACK WITH WHITE LED. To see what other colors are available, please visit my other listings. Specs:Type: Momentary Push Button SwitchOperation Type: Normally Open (yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)Housing Material: Plated BrassMounting hole Size: 12mmMounting Panel Thickness: 1mm-6mmOperation Pressure: about 5nOperation Stroke: 2.5mmLED Rated Voltage: 6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring) *note: This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.LED Life: About 40,000 hoursLED Power Draw: 15mAContact Resistance: 50 mOhmMechanical Life: 500,000 cyclesSwitch Rating: 2A/36VDC What does all this mean? You’re getting a tough switch that will last a long time in your instrument and look good doing it! The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it. The mounting hole is slightly larger than a standard volume or tone pot (12MM vs. 9MM) which means that if you decide to go back to your original setup, you don’t have to buy a new pickguard or repair that hole in your wood. This package comes with everything:(1) Tesi POCO 12mm Momentary Guitar Kill Switch (1) Tesi Quick-Connect wiring Bundle that includes: (1) Black/Black ground wire (1) Black/White hot wire (1) White/Red Power wire with resistor (1) 9V Battery Harness with resistor (1) On/Off Rocker Switch(1) Set of easy-to-follow wiring instructions(2) Spare 270 Ohm resistors for custom wiring jobs When used with active pickups and/or a stereo output jack (not included) the Tesi POCO does not require the additional on/off rocker switch. Each Tesi Guitar Kill Switch is guaranteed against defect for one year from the date of sale. Contact us for more details. The Tesi Switch Difference:We test every switch before packaging it. As a result, the failure rate is less than 1%. We package the 12MM and larger switches in a custom cut foam block and place in a small box for protection. The box also includes a couple of Tesi Switch guitar picks, as well as all the wiring necessary to install in an active or passive system, and we are always happy to help with installation questions. If something does go wrong, our switches have a 1-Year Guarantee against defect or failure. PLEASE NOTE: Do not try to connect the switch directly to a battery. The LED is a 6V bulb and requires a resistor with a minimum value of 270 Ohms to work with a 9V battery. Using a 9V battery without the resistor voids the warranty on the switch.